Æ»¹ûÒùÔº

SP0194: Biomedical Waste Sterilization

Status: °¿±·³Ò°¿±õ±·³ÒÌýJune 2018 -Ìý

The Biomedical Waste Sterilization project aims to reduce GHG emissions by replacing the weekly trucking of non-anatomical biomedical waste for disposalÌýfrom Montreal to Brampton (ON) with a local sterilizing shredder (autoclave) for on-campus use by Hazardous Waste Management (HWM).

Read the full project description

On average, Æ»¹ûÒùÔº's research operations are generating 50 000 kg of non-anatomical biomedical waste annually.ÌýThe waste is transported on a weekly-basis to aÌýdisposal site, located in Brampton (ON).ÌýThe weekly 1200-km round-trip from Montreal is a source of negative environmental impacts: the frequency of trips to the sterilizing site increase the chances of an accident involving hazardous material; and unshredded waste has a large landfill impact.Ìý

The project involvesÌýinstallation of a shredding sterilizer (also known as an autoclave) for use by Hazardous Waste Management (HWM) to treat non-anatomical biomedical waste locally, which represents roughly 65% of total biomedical waste volume generated on campus.This new autoclave would mainly be for the sterilization of the wastes collected by HWM, however it can also be made available to the departments who autoclave their own wastes and could result in the elimination of some of the local autoclaves.

A switch to a centralized autoclave would result in a 65% immediate reduction in the number of boxes trucked to Brampton, ON each week, an 80% volume reduction in waste sent to landfill, and a decrease in the carbon footprint associated with this operation.Ìý

Finally, the number of biohazard certificates, required for a researcher to work with infectious material, is on the rise, which suggests that the volumes of biomedical waste generated by Æ»¹ûÒùÔº research is going to increase in the short to medium term. Savings made by autoclaving that waste locally would potentially be substantial.

Resources from the SPF will be used to purchase the equipment (autoclave, bins, holders) as well as cover maintenance of the autoclave.Ìý

Photos

Ìý

Contact

christian.bouchard [at] mcgill.ca (Christian Bouchard)

Back to top